View source

From Heli-Wiki

for HOWTO Wiki DX7 with Blade CP 4n1

Jump to: navigation, search

You do not have permission to edit this page, for the following reason:

The action you have requested is limited to users in the group: Users.

You can view and copy the source of this page:

== Setting up DX7 with Blade CP 4n1 ==


'''Materials:'''

*1 – Servo Y Split Extension Cable [http://www.horizonhobby.com/Products/Default.aspx?ProdID=EXRA315 EXRA315]
*1 – Servo Extension Cable [http://www.horizonhobby.com/Products/Default.aspx?ProdID=JRPA095 JRPA095]
*1 – Spectrum AR6100
*1 – 4n1 WITHOUT Receiver

[[Image:dx7_4n1_setup 029.JPG|none|thumb|200px]]

This is the plan below. (thanks Vector for the image)

[[Image:4N1MODNoGyro.GIF|none|thumb|200px]]

First we need to modify one of the Female ends by cutting the access plastic off.  This modification will show only the pins.  This end will plug into the Modified 4n1.  

[[Image:dx7_4n1_setup 031.JPG|none|thumb|200px]]

I used a razor blade to cut the female plastic cover off.  

[[Image:dx7_4n1_setup 030.JPG|none|thumb|200px]]

[[Image:dx7_4n1_setup 032.JPG|none|thumb|200px]]

We need modify the same thing with the other servo extension by cutting off the female part.

[[Image:dx7_4n1_setup 034.JPG|none|thumb|200px]]

[[Image:dx7_4n1_setup 035.JPG|none|thumb|200px]]

[[Image:dx7_4n1_setup 036.JPG|none|thumb|200px]]

Now take the end of the male modified servo Y split extension and stick that into your throttle socket on the 4n1 and then plug the other male end of the Y splitter to the AR6100 Throttle socket as shown in the picture below.

[[Image:dx7_4n1_setup 038.JPG|none|thumb|200px]]

Now then take the modified male end of the servo extension and plug that into the rudder socket on the 4n1.  Then insert the other end into the AR6100 Rudder socket as shown below.

[[Image:dx7_4n1_setup 040.JPG|none|thumb|200px]]

The left over servo extension will go to your ESC.

You can then Pursue the DX7 setup by this link. [[HOWTO_DX7_and_Blade_CP]]

Works great!  Have fun and fly!  :)

Return to HOWTO Wiki DX7 with Blade CP 4n1.

Retrieved from "http://www.heli-wiki.com/mediawiki/index.php/HOWTO_Wiki_DX7_with_Blade_CP_4n1"

Views

Personal tools

Search

Toolbox